Handling a Sudden Water Heater Shutdown: Essential Steps
Handling a Sudden Water Heater Shutdown: Essential Steps
Blog Article
This post which follows relating to No Hot Water — Water Heater Repair is especially informative. Don't bypass it.
Many modern-day homes make use of an electrical hot water heater for their heater, because of its benefit and ease of use. Nonetheless, similar to any other electric home appliances, issues may emerge with its use, suddenly. It can be really frustrating to awaken to a chilly shower instead of a hot one or having your bath with water that isn't hot adequate or perhaps as well hot. Whatever the instance may be, water heater issues can be fairly nerve-racking. The good news is, we've made a listing of possible solutions to your water heater problems. There are a variety of aspects that might trigger a number of these issues, maybe a concern with the power supply, the electrical burner, or the thermostat. Before doing anything, guarantee you turn off the major power supply for safety and security. Whatever the trouble is, getting it dealt with ought to not pose too much of an issue if you follow these actions:
Call A Specialist:
If after replacing all malfunctioning components as well as resetting your temperature, the hot water heater still isn't working, you may need to speak to a professional plumber for an expert opinion. The trouble with your heating unit could be that the hot and cold faucets have been changed or it may be undersized for the amount of warm water needed in your home. Whatever the instance may be, a specialist plumber would aid address the issue.
Check Your Power Supply:
As fundamental as this might appear, it is really essential. Without appropriate power, your water heater will certainly not work. So the first thing to do when your water suddenly retires is to validate that it isn't a power problem. Inspect if the fuse is blown out or the circuit breaker stumbled. If the circuit breaker is the problem, simply transform it on and off once more. Change any damaged or damaged fuse. Examine the appliance with power after these adjustments to see if it's currently working.
Check Your Thermostat:
If your water heater still isn't functioning or the water coming out isn't hot enough, you might require to examine the temperature settings on your upper thermostat. Make sure the breaker is switched off before doing anything. Open the gain access to panel as well as press the red switch for temperature level reset over the thermostat. This should help heat up the water. Transform the breaker back on and also check if the problem has been fixed.
Inspect the Burner in the Hot Water Heater:
If it's not a power trouble, then try taking a look at your burner if it is still functioning. Examine each of your burner to ensure the trouble isn't with any one of them. If any one of them is damaged, change that part and then check whether the hot water is back on.
Final thought
Water heater issues are not always major. Much of them are because of small problems like a blown fuse or worn-out heating element. Replacing the faulty parts should suffice. Nonetheless, if you are still not able to resolve the trouble, give a call to your closest plumber ahead to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I hope you liked our excerpt about What Would Cause My Electric Water Heater to Stop Working?. Thanks a ton for spending some time to browse our piece of content. If you enjoyed reading our blog posting kindly remember to share it. Thank you for your time. Please visit our blog back soon.
Rely on our emergency expertise. Report this page